Digitech Mofet Distortion Pedal DOD Gunslinger

The Gunslinger pedal boasts aggressive MosFET distortion designed to turn your American Twin amp into a fire-breathing dragon from the Isles of Britannia. A gentle mid-range hump helps your leads jump out in a mix, and a powerful separate EQ controls for the lows and highs offer plenty of tone sculpting. The Gunslinger can also run at 9v, or 12v if you need more headroom.

GAIN CONTROL
This control is used to adjust the amount of compression being applied to your signal. Turn this clockwise to increase the compression

LEVEL CONTROL
This control is used to adjust the output to your signal. Turn this clockwise to increase the output level.

LOW CONTROL
This control is used to boost or cut low frequencies. Turn clockwise for bombastic low end, counter-clockwise to clean up any mud and bring out the mids

HIGH CONTROL
This control is used to boost or cut low frequencies. Turn clockwise to boost the high, counter-clockwise to cut the treble, enhancing the mids.

LED POWER INDICATOR
This lights up when the pedal is on.

FOOTSWITCH
Press to turn the effects on or off.

OUTPUT CONNECTOR
Connect this to the input of your amplifier or your other effects.

INPUT CONNECTOR
Connect your instrument or the output of another effect pedal to this input connector.

SPECIFICATIONS

• INPUT 1 x ¼” instrument
  
• OUTPUT 1 x ¼” instrument
  
• CHASSIS MATERIAL All Metal
  
• POWER SUPPLY 9V Alkaline Dry Battery, PS0913DC power supply

Dimensions    

• HEIGHT 2.25” (5.71 cm)
  
• WIDTH 2.63” (6.68 cm)
  
• LENGTH 4.68” (11.88 cm)
  
• WEIGHT 0.62 lbs. (0.281 kg.)